Flow measuring technology For liquids, gases and steam

Water & Wastewater: Water is our life

15

Product highlights

Verification made easy with Heartbeat Technology The smallest measuring inaccuracies can cause shortfalls in the end-of-year accounting for providers or consumers. In the water industry’s 24-hour operation, removing flowmeters for test measurements or recalibration is simply not realistic. The questions asked by a plant operator are therefore always the same: • How can I prove that my flowmeter measures within the specified accuracy? • How can flow measuring points for custody transfer be inspected and verified in accor dance with the law? • Is it possible to extend the calibration intervals specified by law? Answers to all of these questions are provided by the unique “Heartbeat Technology.” This function, integrated into the measuring electronics, allows to monitor Proline flow meters constantly and verify their performance at any time – guaranteeing high measurement quality: • Audited and attested self-monitoring and verification (attested by TÜV SÜD) • Verification possible at any time using any device interface – no presence in the field required • No process interruption required • Metrologically traceable verification • Documentation in accordance with ISO 9001 • Guided and time-saving device programming

Promag W 800 (Electromagnetic) For regions without power supply Battery-powered flowmeter for drinking and process water. Encrypted data transfer via mobile network. Robust, well-proven sensor for installation under water or underground. Battery life up to 15 years. Promag W/D 10 (Electromagnetic) For basic applications For water and wastewater. Easy-to-use operation concept. Drinking water approvals. Promag W: Flanged device (DN ≤ 3000/120") with 0 x DN inlet run and without pressure loss. Promag W 400 (Electromagnetic) The specialist with corrosion protection For demanding raw water or wastewater. Robust, completely welded sensor for opera tion under water or underground due to IP68 (Type 6P) and certified corrosion protection (EN ISO 12944). Custody transfer. Drinking water approvals. Up to DN 3000 (120"). Promag W 300/500 (Electromagnetic) The specialist for hazardous areas With up to four signal outputs (I/Os). Com pletely welded sensor with certified corrosion protection (EN ISO 12944). Drinking water approvals. WLAN communication for a time saving commissioning.

Prosonic Flow B 200 (Ultrasonic) The specialist for wet biogas

Accurate measurement of digester gas and biogas also with low process pressure, low flow rates or fluctuating gas composition. Integrated real-time methane fraction analysis. With diagnostic functions. Energy balancing by calculating corrected volume, calorific value or Wobbe index. With hazardous area approvals.

t-mass F/I 300/500 (Thermal) For controlling aeration air

Reliable gas flowmeter, e.g. for aeration control in activated sludge basins. High performance, large turndown. Robust, drift-free sensor and IP68 (Type 6P) for harsh ambient conditions. No moving parts. Up to DN 1500 (60").