Flow measuring technology For liquids, gases and steam

Saving energy and costs – together

27

Product highlights

Don’t give wet steam a chance Time and time again, insufficient insulation, defective condensate drains as well as pressure and temperature fluctuations lead to dangerous wet steam. Moreover, the transfer of heat energy via wet steam is not energy-efficient. This is now a thing of the past! As the world’s first vortex flowmeter, Prowirl F 200 is capable of permanently measuring the steam quality in the piping. Wet steam occurs through the condensation of steam. First, the condensate flows at the bottom of the pipe and then smears up the wall, which affects the measuring signal of Prowirl F 200. This effect can be used to determine the steam quality, which can be outputted as measured variables: • Measurement of the dryness fraction between 80 and 100% – and thus the determination of the steam type (wet, saturated or superheated steam) • Exact mass measurement of the steam and/ or condensate quantity (e.g. in kg/h)

Picomag (Electromagnetic) Flow metering in a pocket-sized format For cost-effective measurement of conduc tive liquids in numerous industries. Space saving device where space is at a minimum. Integrated temperature measurement. Operation and commissioning using Blue tooth and the SmartBlue app. Promass K 10 (Coriolis) For utilities Alternative for conventional volumetric and variable area flowmeters. Direct mass flow measurement in WFI water purification skids. Fast installation and commissioning. Auto-rotating display with touch screen and guided menus. No inlet/outlet runs. ducts. t-mass F/I for almost all gas mixtures and utility gases, e.g. natural gas or oxygen. Prowirl F 200 (Vortex) All-rounder for steam, gas and air Multivariable loop-powered two-wire device (4–20 mA). With pressure/temperature measurement and a flow computer for the calculation of mass and energy flow. With worldwide unique in-line wet steam measurement. Lifetime calibration factor. Promag W 400 (Electromagnetic) For process, cooling and wastewater Measurement is independent of pressure, density and temperature. No pressure loss. Combinable with flow computers and temperature sensors for deltaheat applications (energy). Prosonic Flow 93T (Ultrasonic) For temporary consumption measure ment of water Portable ultrasound measuring system for flexible monitoring, testing and verifying metering points. With integrated data logger. Data transmission via USB memory stick. t-mass A/B 150 (Thermal) t-mass F/I 300/500 (Thermal) Cost-effective metering of utility gases For leakage detection in gas networks and/ or in-house consumption accountancy of compressed air, CO 2 , nitrogen or argon. Multivariable measurement of mass flow, corrected volume flow, FAD volume flow and temperature. Inline (A, F) and insertion versions (B, I) for pipes and rectangular

100% dryness fraction (saturated steam, χ = 1)

90% dryness fraction (χ = 0.9) 10% condensate (with wavy flow)

80% dryness fraction (χ = 0.8) 20% condensate (with annular flow) Alarm !