Flow measuring technology For liquids, gases and steam

54

Flow measuring technology for liquids, gases and steam

Prosonic Flow sensors

For measuring from outside (clamp-on sensors)

Prosonic Flow W Water applications • For water, wastewater, hot/cold water in utilities • Process temperature: –20 to +80 °C (–4 to +176 °F) • DN 15 to 4000 (1/2 to 160")

Prosonic Flow P Process industry • For chemicals, petro-

chemicals, life sciences, oil/gas, energy • Process temperature: –40 to +170 °C (–40 to +338 °F) • With hazardous area approvals • DN 15 to 4000 (1/2 to 160")

For guaranteed accuracy (inline sensors)

Prosonic Flow E Fresh water, feed water, condensate • For process water in steam circuits (0 to 150 °C / 32 to 302 °F) • Independent of conductivity and magnetite content • Integrated temperature measurement (energy content) • Traceable factory calibration: Certified industrial heat flow sensor • Ideally suited for custody transfer with warm and hot water (0 to 150 °C / 32 to 302 °F), such as for heat transfer measuring points in district heating networks • Custody transfer approval in accordance with MI 004, EN 1434 (accuracy class 2) ±0.5% o.r. ± 0.02% o.f.s. • DN 50 to 150 (2 to 6") Prosonic Flow E Heat

Prosonic Flow B For biogas, landfill and digester gas • Ideally suited for wet or dirty gases under low pressure • Traceable factory calibration (±1.5% o.r.) • Direct monitoring of the methane content • Calculating corrected volume, calorific value, Wobbe index • DN 50 to 200 (2 to 8") Prosonic Flow F Liquids (chemicals/petrochemicals) • With hazardous area approvals • Traceable factory calibration (±0.3 to 0.5% o.r.) • For compact systems (inlet run max. 5 × DN) • –40 to +200 °C (–40 to +392 °F) • DN 25 to 300 (1 to 12")

For attenuating pipe materials

Prosonic Flow I (insertion sensor) Water & Wastewater • Installation using sensor holders welded into the piping • Option of a dual path version (for short inlet runs) • DN 200 to 4000 (8 to 160")

Prosonic Flow G Oil and gas applications, chemical industries • For raw and processed natural gas,

coal seam gas, shale gas, process gas, gas mixtures as well as wet biogas and digester gas • Up to 150 °C (302 °F) • Up to 100 bar (1450 psi) • High measuring accuracy (±0.5%) and turndown (>133:1) • 1-path version DN 25 (1") 2-path version DN 50 to 300 (2 to 12")