Level measurement

115 Selection according to application

Mechanical conveyor systems

•Monitoring of belt load •Monitoring of feed points •Strong abrasion ( • Fast response times required • Vibration possible

Non-contact

B

Our proposal

Radar Micropilot

Ultrasonics Prosonic

(separated)

(compact)

FMR67B

FMR66B

FMU90/95

FDU93/95

FMU4x

Advantages

• Unaffected by the density of bulk solids, temperature, humidity, filling noise and weather impairment • Purge air connection is standard (FMR67B) • Easy installation with alignment facility •Remote access via Bluetooth® • Heartbeat Technology 2-wire (HART®, PA, Ethernet-APL) ±3mm/±0.12" –40 to +450°C/–40 to +842°F –1 to +16bar/–14.5 to +232psi 1.6 DN 80, DN 100, DN 150, DN 200,

• Separate instrumentation • Self-cleaning effect of sensors • Robust sensor (vibration) • Relay output for point levels • Up to 3 measurements/sec • Easy assembly under conveyor belt derricks (overall size) and above the conveyor belt/crusher 2-/4-wire (4-20mA HART®, DP) ±2mm/±0.08", ±0.2% of measured distance –40 to +150°C/–40 to +302°F +0.7 to +3bar/+10 to +44psi — Threads, flanges (DIN, ANSI, JIS), wall and assembly arm, assembly bracket 45m/148ft

Technical data • Connection •Accuracy • Process temperature* •Process pressure • Min. DC value •Process connection

•Maximum

125m/410ft

measuring range

Application limits

• Risk of build-up formation

use of purge air

• Observe blocking distance •Strong vibration, please use separated instrumentation

* At the process connection

Please note: Radar continued on Page 118

Please note: Ultrasonics continued on Page 126