Level measurement

119 Instrument selection within the measuring principle

Radar • Non-contact, maintenance-free measurement • Unaffected by product properties like density • Unaffected by temperature, filling noise and dust development • Unaffected by vessel materials • Freely adjustable measuring range

Non-contact

Micropilot

Micropilot Horn/parabolic antenna

Micropilot PVDF antenna

Micropilot Horn/drip-off antenne

FMR20

FMR57

FMR66B

FMR67B

•Smaller silos, vessels, bunkers, stockpiles up to max. measuring range 10m/32.8ft

• Silos, open stockpiles with highly dust-generating media • Stockpiles, bunkers with • High, narrow silos/cells • High temperatures up to 400°C/752°F • Very abrasive bulk solids • For small nozzle dimensions (horn) • Precise beam focusing in high, narrow silos/cells (parabolic) • Optional alignment facility • Purge air connection is standard

• Smaller silos,

•High and narrow silos • Large bunkers with measuring ranges up to 125m/410ft • Open stockpiles with high dust • High temperature up to 450°C/842°F •Innovative drip-off or PTFE-plated, flush mounted antenna • Optional alignment device •Purge air possibility • Improved focusing and small beam angle

vessels, bunkers, stockpiles up to max. measuring range 40m/131ft • Very abrasive bulk solids • Optional alignment seal • Optional assembly bracket

C

• Optional alignment seal • Optional assembly bracket

–1 to +3bar/ –14.5 to +43psi

–1 to +16bar/ –14.5 to +232psi

–1 to +3bar/ –14.5 to +232psi –40 to +80°C/ –40 to +176°F Horn, plated with PVDF

–1 to +16bar/ –14.5 to +232psi

–40 bis +450 °C –40 to +842°F PTFE drip-off DN50/2" PTFE-plated, flush-mounted DN80/3" 125m/410ft

–40 to +80°C/ –40 to +176°F Horn, plated with PVDF

–40 to +400°C/ –40 to +752°F Horn: DN 80/3", DN 100/4" Parabolic: DN 200/8", DN 250/10"

10m/32.8ft

50m/164ft (horn) 70m/230ft (parabolic) 1.6 ±15mm/0.6"

30m/98ft

1,6 ±3mm/0.12"

1.6 ±3mm/0.12"

2 ±5 mm/0.2" Rear thread G1, NPT1,

Assembly bracket, DN 80 to DN 150/ 3" to 6" PVDF

Flanges DN 80 to DN 250/3" to 10"

flange DN 80 to DN 150/ 3" to 6" PVDF

DN 80 to DN 250/3" to 10", DN 200 to DN 250/8" to 10" 316L /1.4435/1.4404

316L, 1.4435, PTFE (PP, Alu) sealings

* At the process connection