Proline Promag W 800

Technical data

Proline 800 Transmitter

Promag W Sensor

Display

Backlit graphical display

Nominal diameter

• Full-bore version:

DN 25 to 600 (1 to 24") • Version with restricted measuring tube (no inlet run required): DN 50 to 300 (2 to 12") Flanges: EN (DIN), ASME, JIS, AS

Operation

• Via SmartBlue app (Bluetooth) • Encrypted remote data transmission via LTE Cat M1, LTE Cat NB1, EGPRS 2

Power supply

Battery operation: DC 3.6 V, lithium-thionyl chloride high-performance battery Power grid (option)²: AC 85 to 265 V / DC 19 to 30 V (50/60 Hz) Compact and remote version 2 –25 to +60 °C (–13 to +140 °F) Standard: IP66/67 (Type 4X) Option: IP68 (Type 6P) 1 • 3 pulse/switch outputs • Modbus RS485 • Cellular radio 2 Polycarbonate

Process connections Process temperature

–20 to +80 °C (–4 to +176 °F)

Degree of protection

• Standard: IP66/67 (Type 4X) • Option: IP68 (Type 6P) for remote version ±0.5% o.r. ± 2 mm/s (0.08 in/s)

Material

Design

Max. measured error

Ambient temperature

Turndown over 1000:1 Material (liner) Polyurethane, hard rubber Conductivity ≥20 μS/cm Approvals

Degree of protection

Outputs

• Drinking water: KTW/W270, WRAS BS6920, ACS, NSF 61 • Custody transfer (in prep.) • Pressure: PED, CRN

Inputs 1 status input 2 Communication Modbus RS485, MQTT² (cloud), cellular radio (data transmission via LTE Cat M1, LTE Cat NB1, EGPRS )² Approvals Radio approval²

1 Only with Promag W 800 | 2 Only with Promag W 800 Advanced

Subject to modification

The Promag W 800 measuring system fulfills the EMC requirements according to IEC/EN 61326. It also conforms to the requirements of the EU and ACMA directives and thus carries the and mark.

www.addresses.endress.com

Eco-friendly produced and printed on paper from sustainable forestry.

IN01156D/06/EN/03.21